繁體中文  
  简体中文  
  English
 
  Products > Feed Hopper Improvement
 
General Instruction
Feeding hopper exhaust temp. drop to 35 °C
Advantages:
▶ Cool down factory environment temperature, save huge air- condition cost
▶ Reduce facility equipment's maintenance, ex: aircon, fan etc
▶ Improve product yield, extend machine life
▶ Improve working environment, enhance staff working will
 
 
Product Benefit
 
      
1. Exhaust air temp drop significantly , up to 40%
2. Power consumption saving 20~50%
 
 
Exterior Specification&Installation instruction
1. Fix cooling box @ feeding funnel exhaust by screw
2. Fix blower manifold @ blower outlet by screw
3. Installation DONE
 
 
Principle_Heat Sealed/Preservation
 
  Cold air from top against hot air from bottom, keep hot air @ bottom side of the dry tank effectively
 
 
Principle_Uniformity
 
  1. The device will generate "vortex effect", When hot air against cold air
2. The space in the cylinder on top is used to position/fix vortex air
3. Water vapored @ top of the tank, this can keep compound material dry
 
 
Principle_Effective cooling
 
1. Balance the pressure
2. Out gasing temperature can drop to 35 °C
 
 
Installbase reference
南部尚O塑膠射出廠安裝實況
 
 
After installed
 
Before install: exhaust relief temp 55.9度C
After installed. Drop to 39.4度C
Cool down (55.9-39.4)/55.9=30%
 
 
南部OO城塑膠射出廠安裝實況
 
 
After installed
 
Before install: exhaust relief temp 53.6度C
After installed. Drop to 38.0度C
Cool down (53.6-38.0)/53.6=29%
 
 
中部億O塑膠射出廠安裝實況
 
 
After installed
 
Before install: exhaust relief temp 74.3度C
After installed. Drop to 36.6度C
Cool down (74.3-36.6)/74.3=50%
 
 
以上數據為設定烘烤100℃的環境(室溫36℃下實測)
 
使用裝置後,每小時可以節省電度2.078,等於一天開機24小時可以節省電費49.872RMB
料桶排風口溫度降低30度,且無使用除濕乾燥機,因此室內環境溫度相對可達到大幅降低
 
 
以上數據為設定烘烤120℃的環境(室溫27℃下實測)
 
使用裝置後,每小時可以節省電度2.53,等於一天開機24小時可以節省電費60.72RMB
且排風口溫度降低48度,因此室內環境溫度相對可達到大幅降低
 
 
 
 
New Product Patent
New patent specification
※ docket number: 1050210223   ※ IPC classification:
 
[New name] (Chinese / English)
Barrel cooling apparatus drying energy
 
【Chinese】
This authoring system provides a cooling drum saving drying apparatus mainly includes a drying drum, around the bottom section of the partial drying tank connected to an end of a heating element, the heating element and the other end connected to a coupling phase, the coupling body otherend is with a blower coupled, and the coupling member periphery of a coupling member are coupled, and the coupling element one end of the coupling body coupled the other end is with a filter means coupled, the filter means is provided in the drum drying tank th the top of the drying coupled to the top, whereby the heat generated by the heating element cycle up and down through the connecting element,the effective average heat inside the drying drum, and the average heat transmission effect can reduce the indoor temperature are high, the efficiency can be improved more of its drying plastic materials.
 
【English】
[Representative drawing]
Fig designated representative case: a first FIG.
[Fig symbol representative of the present simple DESCRIPTION:]
1‧‧‧ bake barrel
2‧‧‧ heating element
3‧‧‧ link body
4‧‧‧ blower
台灣專利案號:M535149    
大陸專利案號:201621043294.7

Address : No.38, Ln. 159, Yonghua 11th St., Anping Dist., Tainan, Taiwan | TEL : 06-2990908 | FAX : 06-2983903 | E-mail : yang555168@gmail.com