繁體中文  
  简体中文  
  English
 
  Products > Frequency Inverter
 
Frequency Inverter Chassis Unit
‧Chassis design for dust-proof. Energy saving ratio up to 25 – 65%
‧The temperature of hydraulic oil is reduced significantly (5 - 15°C).
‧Low noise. Easy to set up and operate.
 
 
Description
Generally up to 70% of the electricity consumed by injection molding machine is never used in the molding process.
It's wasted.
Jin-Energy Frequency inverter chassis unit with advanced control technology is a real energy saver
achieving maximum drive capacity with minimum power consumption.
 
 
Feature
1. Chassis design for dust-proof.
2. Energy saving ratio up to 25 – 65%. Reduce the number of phase capacitors. Return of investment is very quick
3. Reduce motor activating current, particularly in the power supply of generator.
4. The temperature of hydraulic oil is reduced significantly (5 - 15°C).
Prolong the life of oil seal and reduce the cooling water use.
5. Low noise. Start and stop smoothly. Eliminate the hydraulic impact.
6. Easy to set up and operate.
 
Based on the voltage of machine and rated power of motor.
‧PI5 Series:Power source 3PH 200~240V
Rated power of the motor( PH/HP ):3PH/7.5 ~ 3PH/150
200V Series Rated power of the motor ( HP ) 400V Series Rated power of the motor ( HP )
2007 7.5 4007 7.5
2010 10 4010 10
2015 15 4015 15
2020 20 4020 20
2025 25 4025 25
2030 30 4030 30
2040 40 4040 40
2050 50 4050 50
2060 60 4060 60
2075 75 4075 75
2100 100 4100 100
2125 125 4125 125
2150 150 4150 150
    4175 175
    4200 200
    4250 250
    4300 300
    4420 420
 
Can be widely used in motor control area such as pumps/fans/compressors/textile machines/plastic injection ...etc
 

Address : No.38, Ln. 159, Yonghua 11th St., Anping Dist., Tainan, Taiwan | TEL : 06-2990908 | FAX : 06-2983903 | E-mail : yang555168@gmail.com